Home
|
Product Catalog
|
Available Extras
|
Mounting Lug Data
|
Cross Reference
|
Ordering Reference
|
Request More Information
|
Contact Us
Our Products
H300 Type - Round Outlet Boxes
H400 Type - Square Outlet Boxes
H1200 Type - Unflanged Junction and Pull Box
H2200 Type - Pull and Junction Box (with overlapping cover)
H3200 Type - Hinged Weatherproof Box
H3200-T Type - Hinged Weatherproof Terminal Cabinets
H42000 Type - Metal-Pipe Pole Bases
H5400 and H5600 Type - Explosion Gutter Boxes
H5800 Type - Checkered Cover Sidewalk Box
H6000-Type - Explosion Housing
H6200 Type - Internal Recess Flanged Box
H7000 Type - Flanged Recessed Cover Box
H8000 Type - Flat Flanged Box
H8200 Type - Hinged-Door and Trim Cabinets
HD6000 Type - Heavy Duty Box
H6800 Type - Flanged Recessed Cover Topping Box
HD5400 and HD5600 Type - Heavy Duty Gutters
Search Catalog :
By Stock #
By Keyword
Use a (*) to broaden your search results
All Categories
>
H8000 Type - Flat Flanged Box
>
Item # H80-080606
Item # H80-080606, H8000 Type - Flat Flanged Box
Printable Page
Email This Page
Save To Favorites
Please wait…
Surface MountingNEMA 6P - NEMA 4X - NEMA 6 - NEMA 4- NEMA 3RCast Iron - Hot Dipped GalvanizedThird Party Certification: UL File E 189027Standard Construction:1.Box and plain cover of cast iron.2.Stainless steel machine screws.3.Neoprene gasket.4.Flange and back of cover ground flat before galvanizing.Available Extras:1.Drilling only. Drilling and tapping.2.Bosses for five threads. Special gaskets.3.Mounting lugs.4.Plain brass or checkered bronze covers.5.Interior mounting buttons tapped blind.H8000 type boxes feature wide flanges that provide ample contact with cover and gasket to insure tightness even under widely varying temperature and climatic changes. Flange widths are graduated from a minimum of three quarters of an inch on small boxes to a width of one and a half inches on large boxes. Screws are properly spaced to make these boxes weathertight under severe natural forces of driving rain, snow, sleet or drippage.Conduit entrances of five tapped threads for raintight requirements usually require bosses.Mounting lugs afford easier installation and add sturdiness to the conduit system.For Class II, Groups E, F and G hazardous locations, H8000 Type Boxes for class II, (Groups E, F, and G) Hazardous locationsClass II, Groups E, F and G hazardous locations are ones in which explosive mixtures of air with metal dust (Group E), or carbon, coke or coal dust (Group F), or grain dust (Group G), are encountered. Enclosures with adequate flanges, mechanically held gaskets of proper composition, and bossed and tapped conduit entrances with five threads will meet Class II requirements.All H8000 type boxes listed above will conform to these requirements when ordered specifically as follows:1.With gasket of vellumoid: Specify "Mechanically Attached" (Extra 10%)2.With bossed and tapped conduit entrances of five threads Mounting Lugs3.Mounting lugs are optional, but mounting holes through box are not permissible. See further listing on Class II boxes, under Metal Pipe and Pole Bases and under Explosion Housing.H5400 and H5600 type and H6000 type boxes for Class I, Groups C and D hazardous location are listed under Explosion Housing.
larger image
larger image
Specifications
Type
H8000
Construction
cast iron
Mounting
Surface
Inside Length
8
in.
Inside Width
6
in.
Inside Depth
6
in.
Approx. Weight
18.0
lbs
Approx. Wall Thickness
1/4
in.
Third Party Certification
UL E189027
Holes can be boss, drilled and tapped
Holes can be boss, drilled and tapped by Hope Electrical Products at additional cost. Please mark up the hole locations on the attached drilling template and submit with your order to request for quote.
Stock Note
If you don’t see a box size listed that you need, please inquire - we may have it. This list does not represent all of our boxes.
MORE IMAGES
·
Final-H-8000
DOWNLOADS
Mounting Lug Data
(PDF, 151KB)
Cross Reference
(PDF, 558KB)
Ordering Information
(PDF, 352KB)
Drilling Template for Cast Boxes
(PDF, 1009KB)
