Home
|
Product Catalog
|
Available Extras
|
Mounting Lug Data
|
Cross Reference
|
Ordering Reference
|
Request More Information
|
Contact Us
Our Products
H300 Type - Round Outlet Boxes
H400 Type - Square Outlet Boxes
H1200 Type - Unflanged Junction and Pull Box
H2200 Type - Pull and Junction Box (with overlapping cover)
H3200 Type - Hinged Weatherproof Box
H3200-T Type - Hinged Weatherproof Terminal Cabinets
H42000 Type - Metal-Pipe Pole Bases
H5400 and H5600 Type - Explosion Gutter Boxes
H5800 Type - Checkered Cover Sidewalk Box
H6000-Type - Explosion Housing
H6200 Type - Internal Recess Flanged Box
H7000 Type - Flanged Recessed Cover Box
H8000 Type - Flat Flanged Box
H8200 Type - Hinged-Door and Trim Cabinets
HD6000 Type - Heavy Duty Box
H6800 Type - Flanged Recessed Cover Topping Box
HD5400 and HD5600 Type - Heavy Duty Gutters
Search Catalog :
By Stock #
By Keyword
Use a (*) to broaden your search results
All Categories
>
HD6000 Type - Heavy Duty Box
>
Item # HD60-241810
Item # HD60-241810, HD6000 Type - Heavy Duty Box
Printable Page
Email This Page
Save To Favorites
Please wait…
Surface MountingNEMA 6 - NEMA 4 - NEMA 3RCast Iron - Hot Dipped GalvanizedStandard Construction:1.Heavy walled box and cover of cast iron.2.Plated steel cap screws.3.Neoprene type packing for gasket.4.Four mounting lugs on standard spacing.Available Extras:1.Drilling and tapping.2.Bosses for five threads.3.Interior mounting buttons tapped blind.4.Special gaskets. Bronze hinges.HD6000 type heavy duty boxes are heavy walled assemblies substantially gasketed on wide flanges for the most severe types of weathertight and watertight installations.They are ideal for submersion service and have been successfully installed in flooded manholes, on docks, piers, seawalls, underground and in sub-stations, and will remain watertight under high heads of water.Protected steel cap screws are standard but monel, bronze or stainless can be supplied. Conduit entrance should be ordered with bosses for five.-threads to insure watertight conduit entry if the wall thickness is less than that required for five threads. Interior mounting buttons located on specified centers and tapped blind for watertightness provide an excellent method for mounting panels, relays, transformers and similar devices.HD6000 type boxes are acceptable for Class II, Groups E, F, and G hazardous locations when ordered with1.Vellumoid gasket – change “Add 8% to list price of box” to “At additional cost”.2.Bossed conduit entrances tapped for five threads.All boxes that are made in cast iron can also be made in cast aluminum – just add “AL” to the end of the part number to indicate cast aluminum.
larger image
larger image
Specifications
Type
HD6000
Construction
cast iron
Mounting
Surface
Inside Length
24
in.
Inside Width
18
in.
Inside Depth
10
in.
Approx. Weight
280
lbs
Approx. Wall Thickness
7/16
in.
Holes can be boss, drilled and tapped
Holes can be boss, drilled and tapped by Hope Electrical Products at additional cost. Please mark up the hole locations on the attached drilling template and submit with your order to request for quote.
Stock Note
If you don’t see a box size listed that you need, please inquire - we may have it. This list does not represent all of our boxes.
MORE IMAGES
·
Final-HD-6000
DOWNLOADS
Cross Reference
(PDF, 558KB)
Ordering Information
(PDF, 352KB)
Drilling Template for Cast Boxes
(PDF, 1009KB)
Heavy Duty Gutters
HD5400 and HD5600 Type - Heavy Duty Gutters