Hope Electrical Products Manufactures Electrical Boxes & Cabinets for Industrial & Commercial Use
Our ProductsH300 Type - Round Outlet BoxesH400 Type - Square Outlet BoxesH1200 Type - Unflanged Junction and Pull BoxH2200 Type - Pull and Junction Box (with overlapping cover)H3200 Type - Hinged Weatherproof BoxH3200-T Type - Hinged Weatherproof Terminal CabinetsH42000 Type - Metal-Pipe Pole BasesH5400 and H5600 Type - Explosion Gutter BoxesH5800 Type - Checkered Cover Sidewalk BoxH6000-Type - Explosion HousingH6200 Type - Internal Recess Flanged BoxH7000 Type - Flanged Recessed Cover BoxH8000 Type - Flat Flanged BoxH8200 Type - Hinged-Door and Trim CabinetsHD6000 Type - Heavy Duty BoxHD6800 Type - Flanged Recessed Cover Topping BoxHD5400 and HD5600 Type - Heavy Duty Gutters

Search Catalog :

GO

Use a (*) to broaden your search results

All Categories > H8000 Type - Flat Flanged Box > View Items  

H8000 Type - Flat Flanged Box

Check up to five results to perform an action.


Surface Mounting
NEMA 6P - NEMA 4X - NEMA 6 - NEMA 4- NEMA 3R
Cast Iron - Hot Dipped Galvanized
Third Party Certification: UL File E 189027


Standard Construction:


  1. Box and plain cover of cast iron.
  2. Stainless steel machine screws.
  3. Neoprene gasket.
  4. Flange and back of cover ground flat before galvanizing.

Available Extras:
  1. Drilling only. Drilling and tapping.
  2. Bosses for five threads. Special gaskets.
  3. Mounting lugs.
  4. Plain brass or checkered bronze covers.
  5. Interior mounting buttons tapped blind.

H8000 type boxes feature wide flanges that provide ample contact with cover and gasket to insure tightness even under widely varying temperature and climatic changes. Flange widths are graduated from a minimum of three quarters of an inch on small boxes to a width of one and a half inches on large boxes. Screws are properly spaced to make these boxes weathertight under severe natural forces of driving rain, snow, sleet or drippage.
Conduit entrances of five tapped threads for raintight requirements usually require bosses.
Mounting lugs afford easier installation and add sturdiness to the conduit system.
For Class II, Groups E, F and G hazardous locations,

H8000 Type Boxes for class II, (Groups E, F, and G) Hazardous locations

Class II, Groups E, F and G hazardous locations are ones in which explosive mixtures of air with metal dust (Group E), or carbon, coke or coal dust (Group F), or grain dust (Group G), are encountered. Enclosures with adequate flanges, mechanically held gaskets of proper composition, and bossed and tapped conduit entrances with five threads will meet Class II requirements.
All H8000 type boxes listed above will conform to these requirements when ordered specifically as follows:
  1. With gasket of vellumoid: Specify "Mechanically Attached" (Extra 10%)
  2. With bossed and tapped conduit entrances of five threads Mounting Lugs
  3. Mounting lugs are optional, but mounting holes through box are not permissible.
    See further listing on Class II boxes, under Metal Pipe and Pole Bases and under Explosion Housing.
H5400 and H5600 type and H6000 type boxes for Class I, Groups C and D hazardous location are listed under Explosion Housing.

All boxes that are made in cast iron can also be made in cast aluminum – just add “AL” to the end of the part number to indicate cast aluminum.



Search Items



    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  
Compare Items
   
  Results 1 - 25 of 192  1 2 3 4 5 »  

Item #

Construction

Inside Length

Inside Width

Inside Depth

Approx. Weight

Approx. Wall Thickness

H80-040403 cast iron 4 in. 4 in. 3 in. 6.6 lbs 3/16 in.
H80-040403-AL Cast Aluminum 4 in. 4 in. 3 in. 2.28 lbs 3/16 in.
H80-040404 cast iron 4 in. 4 in. 4 in. 6.8 lbs 3/16 in.
H80-040404-AL Cast Aluminum 4 in. 4 in. 4 in. 2.34 lbs 3/16 in.
H80-060403 cast iron 6 in. 4 in. 3 in. 7.6 lbs 3/16 in.
H80-060403-AL Cast Aluminum 6 in. 4 in. 3 in. 2.62 lbs 3/16 in.
H80-060404 cast iron 6 in. 4 in. 4 in. 8.2 lbs 3/16 in.
H80-060404-AL Cast Aluminum 6 in. 4 in. 4 in. 2.83 lbs 3/16 in.
H80-060603 cast iron 6 in. 6 in. 3 in. 10.0 lbs 1/4 in.
H80-060603-AL Cast Aluminum 6 in. 6 in. 3 in. 3.45 lbs 1/4 in.
H80-060604 cast iron 6 in. 6 in. 4 in. 11.0 lbs 1/4 in.
H80-060604-AL Cast Aluminum 6 in. 6 in. 4 in. 3.79 lbs 1/4 in.
H80-060606 cast iron 6 in. 6 in. 6 in. 13.5 lbs 1/4 in.
H80-060606-AL Cast Aluminum 6 in. 6 in. 6 in. 4.66 lbs 1/4 in.
H80-080403 cast iron 8 in. 4 in. 3 in. 10.0 lbs 3/16 in.
H80-080403-AL Cast Aluminum 8 in. 4 in. 3 in. 3.45 lbs 3/16 in.
H80-080404 cast iron 8 in. 4 in. 4 in. 11.0 lbs 1/4 in.
H80-080404-AL Cast Aluminum 8 in. 4 in. 4 in. 3.79 lbs 1/4 in.
H80-080603 cast iron 8 in. 6 in. 3 in. 14.0 lbs 1/4 in.
H80-080603-AL Cast Aluminum 8 in. 6 in. 3 in. 4.83 lbs 1/4 in.
H80-080604 cast iron 8 in. 6 in. 4 in. 15.0 lbs 1/4 in.
H80-080604-AL Cast Aluminum 8 in. 6 in. 4 in. 5.17 lbs 1/4 in.
H80-080606 cast iron 8 in. 6 in. 6 in. 18.0 lbs 1/4 in.
H80-080606-AL Cast Aluminum 8 in. 6 in. 6 in. 6.21 lbs 1/4 in.
H80-080803 cast iron 8 in. 8 in. 3 in. 19.0 lbs 1/4 in.
  Results 1 - 25 of 192  1 2 3 4 5 »  
Hope Electrical Products Manufactures Electrical Boxes & Cabinets for Industrial & Commercial Use