Flush MountingNEMA 4 - NEMA 3R - Complies with U/L Std. 50Cast Iron - Hot Dipped GalvanizedThird Party Certification: UL File E 189027Standard Construction:1.Box, flange and cover of cast iron.2.Checkered cover is cross-ribbed.3.Neoprene gasket. Stainless steel fastenings.4.Three piece construction.5.Flanges and covers interchangeable.6.Pry bar notches for lifting.H5800 type boxes have been widely installed in sidewalks and walkways of bridges, dams, tunnels, approached and airports. The checkered non-slip cover, flush with finished concrete, is cross-ribbed for heavy pedestrian traffic. Flanges and covers are replaceable without disturbing box and conduit system if damaged by truck traffic. For H20 loading, galvanized checkered covers available: Add suffix "SC" to the end of part number to indicate checkered cover.All boxes that are made in cast iron can also be made in cast aluminum – just add “AL” to the end of the part number to indicate cast aluminum.
Unit of Measure
Type |
N/A H5800 |
Construction |
N/A Cast Aluminum |
Mounting |
N/A Flush |
Inside Length |
N/A 12 in. |
Inside Width |
N/A 12 in. |
Inside Depth |
N/A 4 in. |
Approx. Weight |
N/A 27.24 lbs |
Approx. Wall Thickness |
N/A 5/16 in. |
Holes can be boss, drilled and tapped |
N/A Holes can be boss, drilled and tapped by Hope Electrical Products at additional cost. Please mark up the hole locations on the attached drilling template and submit with your order to request for quote. |
Stock Note |
N/A If you don’t see a box size listed that you need, please inquire - we may have it. This list does not represent all of our boxes. |
Options |
N/A Galvanized checkered covers |
