Hope Electrical Products Co., Inc. - H1200 Type - Unflanged Junction and Pull Box

Surface Mounting
NEMA 4 - NEMA 3R - Complies with U/L Std. 50
Cast Iron - Hot Dipped Galvanized
Third Party Certification: UL File E 189027

Standard Construction:

Box and plain cover of cast iron.
Stainless steel machine screws.
Neoprene gasket.
Larger boxes have adequate additional screws to insure tightness.

Available Extras:

Drilling only. Drilling and tapping.
Bosses for five threads. Special gaskets.
Mounting lugs.
Interior mounting buttons tapped blind.
Special cast covers.

All boxes that are made in cast iron can also be made in cast aluminum – just add “AL” to the end of the part number to indicate cast aluminum.

Unit of Measure

Items	H12-040202 H1200 Type - Unflanged Junction and Pull Box	H12-040202-AL H1200 Type - Unflanged Junction and Pull Box	H12-040402 H1200 Type - Unflanged Junction and Pull Box	H12-040402-AL H1200 Type - Unflanged Junction and Pull Box	H12-040403 H1200 Type - Unflanged Junction and Pull Box
Type	N/A H1200
Construction	N/A cast iron	N/A Cast Aluminum	N/A cast iron	N/A Cast Aluminum	N/A cast iron
Mounting	N/A Surface
Inside Length	N/A 4 in.
Inside Width	N/A 2 in.	N/A 2 in.	N/A 4 in.	N/A 4 in.	N/A 4 in.
Inside Depth	N/A 2 in.	N/A 2 in.	N/A 2 in.	N/A 2 in.	N/A 3 in.
Approx. Weight	N/A 2.0 lbs	N/A 0.69 lbs	N/A 3.7 lbs	N/A 1.28 lbs	N/A 4.8 lbs
Approx. Wall Thickness	N/A 3/16 in.
Holes can be boss, drilled and tapped	N/A Holes can be boss, drilled and tapped by Hope Electrical Products at additional cost. Please mark up the hole locations on the attached drilling template and submit with your order to request for quote.
Stock Note	N/A If you don’t see a box size listed that you need, please inquire - we may have it. This list does not represent all of our boxes.