HOPE Electrical Products Co., Inc.
HOPE Electrical Products Co., Inc.
3 Fairfield Crescent
West Caldwell, NJ 07006
Phone: 973.882.7400
Fax: 973.244.92926
Email: sales@hopeelectrical.com
Website: www.hopeelectricalproducts.com
Print Back
Surface Mounting
NEMA 3R - NEMA IV - Complies with U/L Std. 50
Cast Iron - Hot Dipped Galvanized

Standard Construction:
  1. Box and cover of cast iron.
  2. Stainless steel hardware.
  3. Neoprene gasket.
  4. Four exterior mounting lugs.
  5. Terminal blocks mounted on interior buttons or pads. Maximum wire size #10 AWG.
Available Extras:
  1. Drilling only. Drilling and tapping.
  2. Bosses for five threads.
  3. Special gaskets.
  4. Hasp without lock.

H3200-T type terminal cabinets are approved H3200 type enclosures in which substantially constructed terminal blocks are mounted. A variety of sizes for differing wire conditions are listed. The terminal blocks, rated at 30 amperes and 750 volts, are mounted on blind tapped buttons or pads that insure weather tightness and provide an air gap under the block. Each terminal block carries a white-faced target strip for marking connections. Ample wiring space is provided between wall of box and block, and, block to block.
Conduit entrances should be ordered with bosses for five threads to insure raintight and dust-tight installation. Every cabinet can be equipped with a galvanized non-removable hasp to prevent tampering.
Unit of Measure

Specifications

Type

 N/A H3200-T

Construction

 N/A cast iron

Mounting

 N/A Surface

No. of Wires

 N/A 4

Argmnt. of Blocks Vertical Rows

 N/A l

Wiring Space Block to Wall

 N/A 1.5 in.

Inside Length

 N/A 5 in.

Inside Width

 N/A 5 in.

Inside Depth

 N/A 3 in.

Wall Thickness

N/A 1/4 in.

Max. Conduit

 N/A 1 in.

No. of Hinges

 N/A 2

No. of Wing Nuts

 N/A 1

Approx. Weight

 N/A 16 lbs

Third Party Certification

 N/A UL E189027

Stock Note

 N/A If you don’t see a box size listed that you need, please inquire - we may have it. This list does not represent all of our boxes.